Universal measurement control CC17 – The all-round talent!
The highly flexible MEITEC measurement control for almost any in-process, pre- and post-process application with incomparable response time.
Range of functions:
- Extensive standard software programs and measurement functions available for e.g. in-process and post-process measurements on grinding and finishing machines.
- Real-time response in the fieldbus cycle thanks to the fastest and parallel measured value and signal processing of all measurement points.
- Additional output of switching threshold signals to fast NC inputs for reaction speeds that undercut the fieldbus cycle.
- Comprehensive standard software programs and measurement functions available, e.g. for in-process and post-process measurements on grinding and finishing machines.
- Measured value and signal processing of all measurement points faster than the fieldbus clock, enabling real-time reaction in the fieldbus clock.
- Standard interfaces: PROFINET, Profibus, potential-free digital and analog inputs/outputs.
- Up to 4 measurement points (8 measurement sensors) can be realized internally.
- External expansion to a total of 16 measurement points (32 measurement sensors) possible.
- Clear HMI for intuitive operation and process visualization.
- Visualization options selectable via 7.0″ or 10.1″ touch panel or VNC access.
- Remote access possible.
- Customer-specific software and visualization adaptations possible.
Plus points:
- Intuitive, easy handling for users
- All standard measured values and signals from all measurement points are available on the fieldbus interface (e.g. PROFINET, Profibus) in parallel and refreshed in the fieldbus cycle.
- Simultaneous display of up to 8 measurement points with measured value bars and numerical output in a process overview screen.
- Zero point correction possible during measurement operation without calling up further menus.
- In addition, 5 freely parameterizable x/t-diagrams are available, in which up to 6 measured values can be displayed in real time during measurement operation.
- Measurement/process history analysis is possible in all x/t diagrams using typical oscilloscope functions.
- Parameter settings and process data can be saved externally and restored as required.
Technical data:
- Internal 2 … 8-channel measurement amplifier (1 … 4 measurement points)
- External expansion to 32 channels (16 measurement points possible via MEITEC IAB4/EPB and/or MEITEC IAB8/EPB)
- 16 digital outputs for the fastest response as standard
- Visualization interface for MEITEC ST70 or MEITEC ST101 touch panel
- VNC interface for black box operation and/or remote access
- USB interface for data backup and creation of screenshots
- 4-stage operator concept
- Process data storage for 100 process data records
- Multilingual menu navigation in German, English and special languages
- Operating voltage 24VDC
- Digital interface up to 48 inputs and 64 outputs
- Fieldbus interfaces PROFINET, PROFIBUS DP, others possible
- Analog input/output interface (current/voltage)
- Control functions possible (stepper motor, pneumatic cylinder, …)
- Visualization functions available (structure-borne sound, force, …)
EXTREMELY FLEXIBLE
ULTRA FAST
MULTIPLE APPLICATION POSSIBILITIES
MEITEC-CC-Series measurement control (typical for new systems)
MEITEC-CC-Series measurement control (typical for retrofit applications)
Touchpanel for the MEITEC CC17
MEITEC ST70
- 7.0″ TFT widescreen touch panel in color
- 1 x USB interface for data backup and creation of screenshots
- Operating voltage 24VDC
MEITEC ST101
- 10.1″ TFT widescreen touch panel in color
- 1 x USB interface for data backup and creation of screenshots
- Operating voltage 24VDC
ST70-TG desktop measurement control – The all-round talent in COMPACT!
The compact, enclosed MEITEC ST70-TG bench-top measurement control offers almost all the possibilities of the MEITEC CC measurement controls.
The compact design is particularly suitable for applications where there is no installation space available in the control cabinet or control panel, e.g. for retrofit conversions.
The design is also advantageous when implementing measurement stations and flexible measurement points.
Range of functions:
- Extensive standard software programs and measurement functions available for e.g. in-process and post-process measurements on grinding and finishing machines.
- Real-time response in the fieldbus cycle thanks to the fastest and parallel measured value and signal processing of all measurement points.
- Additional output of switching threshold signals to fast NC inputs for reaction speeds that undercut the fieldbus cycle.
- Comprehensive standard software programs and measurement functions available, e.g. for in-process and post-process measurements on grinding and finishing machines.
- Measured value and signal processing of all measurement points faster than the fieldbus clock, enabling real-time reaction in the fieldbus clock.
- Standard interfaces: PROFINET, Profibus, potential-free digital and analog inputs/outputs.
- Up to 4 measurement points (8 measurement sensors) can be realized internally.
- External expansion to a total of 16 measurement points (32 measurement sensors) possible.
- Clear HMI for intuitive operation and process visualization.
- Visualization options selectable via 7.0″ or 10.1″ touch panel or VNC access.
- Remote access possible.
- Customer-specific software and visualization adaptations possible.
Plus points:
- Intuitive, easy handling for users
- All standard measured values and signals from all measurement points are available on the fieldbus interface (e.g. PROFINET, Profibus) in parallel and refreshed in the fieldbus cycle.
- Simultaneous display of up to 8 measurement points with measured value bars and numerical output in a process overview screen.
- Zero point correction possible during measurement operation without calling up further menus.
- In addition, 5 freely parameterizable x/t-diagrams are available, in which up to 6 measured values can be displayed in real time during measurement operation.
- Measurement/process history analysis is possible in all x/t diagrams using typical oscilloscope functions.
- Parameter settings and process data can be saved externally and restored as required.
Technical data:
- Internal 2 … 8-channel measurement amplifier (1 … 4 measurement points)
- External expansion to 32 channels (16 measurement points possible via MEITEC IAB4/EPB and/or MEITEC IAB8/EPB)
- 16 digital outputs for the fastest response as standard
- Visualization interface for MEITEC ST70 or MEITEC ST101 touch panel
- VNC interface for black box operation and/or remote access
- USB interface for data backup and creation of screenshots
- 4-stage operator concept
- Process data storage for 100 process data records
- Multilingual menu navigation in German, English and special languages
- Operating voltage 24VDC
- Digital interface up to 48 inputs and 64 outputs
- Fieldbus interfaces PROFINET, PROFIBUS DP, others possible
- Analog input/output interface (current/voltage)
- Control functions possible (stepper motor, pneumatic cylinder, …)
- Visualization functions available (structure-borne sound, force, …)
EXTREMELY FLEXIBLE
ULTRA FAST
MULTIPLE APPLICATION POSSIBILITIES
